About your MGMove

MGMove system parts

Battery Life & Signal Strength

table

Core Features

Your MGMove is full of useful features that you can access with the swipe of your finger. To access your apps, tap the watch face.

Reporting an Emergency

 

The SOS App is one of two ways to activate the device to get help from our Monitoring Center. Tap the SOS icon to initiate help. You can also press and hold the physical red SOS Button on the side of the smartwatch for 5 seconds. In the event of a false alarm, you can cancel the alarm when in the 5 second window.

press button

home screen

Test

The Test App should be pressed at least once a month to ensure that your device is operating correctly in the event of an emergency. You can test your device with an automated recording rather than sending an actual alarm to an agent. Your device will indicate that the test call was successful.

Steps

The Steps App tracks the number of steps taken daily and weekly. The measure toggle needs to be on to collect your step data. To set your goal, click on the gear icon and tap + or -. The Reset button resets the current steps back to 0.  Press the back button to get back to the main screen.

Weather

 

The app uses the location of your device to display current weather conditions.

Weather App Watch face

Settings

 

To access your settings, click on the settings icon from your home screen. Next, tap the words More Info. From there, scroll to the bottom of the screen and tap User Settings. Enter code 1234.

You can change your watch face design or update your Shake to Wake preference.  To change your clock face, tap the name watch face. Then, swipe to the watch face of your choice and tap it. The tap will save the choice, tap the SOS Button to go back. Shake to Wake is turned off by default. Turning Shake to Wake off may extend your battery charge.

Support Circle Apps

If you would like to purchase these additional features call 
1 (800) 313-1191.

Reminders Reminders created in the MyGuardian Web Portal & App can be sent and reviewed by the Care Recipient. The wearer will get an alert that the event was sent. Reminders are sent 15 minutes before the event unless otherwise specified.

They can be reviewed at anytime of the day by tapping the reminders icon. The number badge displays the amount of upcoming reminders for the day. Events in the past will not be shown but you can scroll through your future events for the day and will reset the next day.

reminder alert screen

Messages
The Messages App gives Caregivers the ability to communicate with the wearer via the MyGuardian Web Portal & App. The Messages App icon displays the number of queued messages. Tap the Messages Icon from the home screen to start

SENDING A NEW MESSAGE
Care Circle members must be set up through the MyGuardian portal to be able to receive messages from the wearer. To send a new message, the wearer will tap the initials of the portal member that they want to send a message to. The wearer will be given the option to record a message or use a pre-scripted statement.

New Message Alert icon

REVIEWING A MESSAGE QUEUE
To view queued messages, (messages that have not been deleted or responded to) tap the center Messages Icon. Swipe back and forth to preview messages.

review message queue screen

MESSAGE RESPONSES
When viewing incoming messages the wearer can Read or Play their message, and then,  Respond or Delete. Responses from the wearer can be returned to the sender as a yes, no, or the option to leave an audio recording of 60 secs or less. In the event of a recording, they will have the option to Review, Re-record, Send, or Cancel the message.

Respond to message screen

NEW MESSAGE ALERTS
When a message is first received, it will make an alert sound and display a message preview screen. The wearer can tap on the View Messages icon to read the message in full.

New message alert screen

Add Support Circle Members

The Support Circle Apps allow you to stay connected to the people who support you the most.

Send the Caregiver to this link: mymedicalguardian.com/create-account.

The Caregiver fills out the registration page with their own name and email. They will create a username and password, and then verify the account using text or email verification.

The verification email takes them directly to the next step of the registration process, asking for the Care Recipient’s name, zip code, and the System UDI number. The UDI is a 9 digit number that can be found on the back of the watch face and on the box.

At that point, the Account Owner will be notified that the Caregiver has applied to be a MyGuardian user. They will receive an email that will allow them to review and approve the application.

An approval confirmation email will be sent and at this point the Caregiver will be able to login and use MyGuardian.

MyGuardian Web Portal and Mobile App

NOTE: In order to use the MyGuardian Portal & App to send Messages and chat with the rest of the Support Circle, click on the chat icon in the upper right of the screen. 

To access Reminders click on the Managed Care tab from the left side navigation and then select Activities & Reminders from the expanded left hand sub-navigation.


1. Charge

Begin by facing the red SOS Button up and align the pins on the Charging Cradle with the back of the watch. Voice Assist will announce that the device has been correctly seated on the charger.

The watch will take approximately 2-3 hours to fully charge. The Full Charge indicator at the base of the cradle will be lit green.

2. Activate

Once your MGMove is fully charged, tap the watch face to access the home screen. Next, tap “Test App” to initiate the automated testing process. A call will be placed to our Monitoring Center. Follow voice prompts as directed until you hear a success confirmation. After a few moments, your watch will exit test mode and resume normal operations.

3. Adjust Band

Take the end of the wristband with the holes and pass it through the opening of the metal clasp. Secure the metal anchor pin through the hole that would best fit your wrist. Close the clasp. If the fit is too loose, repeat the previous step until the desired fit is achieved. NOTE: You will only do this for the initial fitting. Once you have set the band to the correct size, you can use the side clasp buttons to put on and remove your watch easily.